-
“How virtual becomes real” 2018
- 18 June 2018
- By Alberto Pugnale
- In Digital Fabrication, Form-finding, News, Parametric Design, Scripting/Tooling, Teaching and learning
- 0 Comments
The 8th edition of “How virtual becomes real” continued the research into the applications of form-resistant structures. The virtual and the real were synthesised by means of both physical form-finding and numerical/digital models. The studio began dedicating five weeks to experimental and numerical form-finding techniques (on elastic gridshells, concrete shells…
-
Ho-Low-Tech: Making in Mixed Reality
- 6 April 2018
- By Alberto Pugnale
- In Alberto Pugnale, Digital Fabrication, Engineering, Form-finding, Parametric Design, Research
- 0 Comments
Sofia Colabella, Alessandro Liuti and I completed a 3-day workshop on “Mixed Reality”, directed by Fologram and NExT Lab at the Melbourne School of Design (MSD). Workshop Overview Mixed reality overlays physical environments with digital content (holograms), fixed in place and at full scale. Holograms can be used as direct…
-
The International Association for Shell and Spatial Structures (IASS) is currently celebrating Frei Otto – recipient of the 2015 Pritzker Architecture Prize – with a Special Issue of the IASS Journal (Vol.59, No.1, March 2018). This publication was edited by Juan Gerardo Oliva (Vice President of the IASS and Professor…
-
“How virtual becomes real” 2017
- 3 September 2017
- By Alberto Pugnale
- In Form-finding, News, Parametric Design, Scripting/Tooling, Teaching and learning
- 2 Comments
The 7th edition of “How virtual becomes real” continued the research into the applications of form-resistant structures. The virtual and the real were synthesised by means of both physical form-finding and numerical/digital technologies. The studio began dedicating 4 weeks to experimental and numerical form-finding techniques. The students were also exposed to…
-
“How virtual becomes real” 2016
- 19 July 2016
- By Alberto Pugnale
- In Form-finding, News, Parametric Design, Scripting/Tooling, Teaching and learning
- 0 Comments
The 6th edition of “How virtual becomes real” continued the research into the applications of form-resistant structures. The virtual and the real were synthesised by means of both physical form-finding and numerical/digital technologies. The studio began dedicating 4 weeks to numerical and experimental form-finding, as well as to fabrication exercises of outstanding case…
-
Structures, algorithms and stone/timber prototypes
- 12 January 2016
- By Alberto Pugnale
- In Alberto Pugnale, Form-finding, News, Parametric Design, Publications/Conferences, Research, Researchers, Academics
- 0 Comments
I participated to a 1-day seminar, which was held at Politecnico di Bari on 11 January 2016. It was kindly organised by a friend and colleague, Giuseppe Fallacara, who is currently working in that university as Associate Professor. During the seminar, Sofia Colabella, Sergio Pone and I delivered three separate presentations about structures,…
-
“How to make things lighter” on Karamba3d.com
- 2 July 2015
- By Alberto Pugnale
- In Alberto Pugnale, Form-finding, News, Parametric Design, Scripting/Tooling, Teaching and learning
- 0 Comments
“How to make things lighter” is a 10-day design studio on parametric design, form-finding, optimisation, technology and fabrication of timber gridshells, which took place at Nanjing University in June 2015. During the studio, Karamba for Grasshopper was implemented as a tool to develop the form and optimise the geometry of timber…
-
“How virtual becomes real” 2015
- 10 June 2015
- By Alberto Pugnale
- In Form-finding, News, Parametric Design, Scripting/Tooling, Teaching and learning
- 0 Comments
This 5th edition of “How virtual becomes real” continues the research into the applications of form-resistant structures, through working methods that seek to synthesise the virtual and the real by means of both physical form-finding and numerical/digital technologies (Karamba3d.com has just published a selection of this semester projects). The studio begins…
-
Aalborg University, Fall semester 2010: I was coordinating the Master’s subject “Formfindings” when I introduced programming using the “parametric wall”. Through a single consistent system of elements and interrelations, designers could rapidly explore a multitude of spatial configurations in what Lars Spuybroek defined ‘the architecture of variation’.
-
MSD Design studio “How virtual becomes real”. Sample projects from semester 1, 2013
- 28 June 2013
- By Alberto Pugnale
- In Engineering, Evolutionary techniques, Parametric Design, Scripting/Tooling, Teaching and learning
- 0 Comments
How virtual becomes real is a design studio offered by the Master of Architecture, MSD, Melbourne University, where the students deal with form-resistant structures, such as RC shells, steel gridshells and post-formed timber gridshells. The first edition was run by Alberto Pugnale and Louis Gadd in Semester 1, 2013.
-
MSD Design studio “How virtual becomes real” on the Karamba3D website
- 28 June 2013
- By Alberto Pugnale
- In Engineering, Evolutionary techniques, Parametric Design, Scripting/Tooling, Teaching and learning
- 1 Comment
Master of Architecture students of the University of Melbourne have completed a 12-week studio that involves Rhino, GH and Karamba to design gridshell structures. The design studio combines theoretical lectures on form-resistant structures with workshop sessions on parametric design and optimisation. The images below are provided by the students Kevin George, Kim Chan, Thomas…
-
The church of Longuelo is the last main building designed by Pino Pizzigoni and could be considered his most innovative work, representing the sum of experimentation about shells made during the last twenty years of his activity. His final project was presented in May 1961. The construction started in 1962 and…